Does DynaPredict have and alarm or light signal?

Yes, whenever the defined velocity or temperature limits are violated, an alert will be signalled by the DynaLogger in the form of a red LED.

The user defines two limits, A1 and A2, A2 being the more critical.

If the ‘A1’ limit is exceeded, the red LED of the DynaLogger will flash once every 5 seconds. If the ‘A2’ limit is exceeded, the red LED of the DynaLogger will flash twice every 5 seconds. If neither limit is exceeded, the green LED of the DynaLogger will flash once every 5 seconds.

In addition, the DynaPredict Web Platform has a dashboard which indicates the points that exceed these alerts, allowing the prioritization of maintenance actions.